آئیے پہلے بریک ڈسکس کے بارے میں بات کرتے ہیں۔بریک ڈسکس۔عام طور پر درمیانی ہوادار ڈسکس ، سوراخ شدہ ہوادار ڈسکس ، اور سیرامک بریک ڈسکس میں تقسیم ہوتے ہیں۔ جیسا کہ نام سے ظاہر ہوتا ہے ، درمیانی ہوادار ڈسک اندر سے کھوکھلی ہے ، اور ٹھنڈی ہوا ٹھنڈا ہونے کے لیے درمیان سے گزر سکتی ہے۔ یہ عام طور پر فرنٹ وہیل کے لیے استعمال ہوتا ہے۔بریک ڈسکس of civil vehicles. Perforated ventilating plate Perforated ventilating plate is to perforate the surface of the ventilating plate to ensure air circulation to the greatest extent and reduce heat attenuation. The perforated ventilating plate is one level higher than the ventilating plate. Ceramic بریک ڈسکس are not ordinary ceramics, but reinforced composite ceramics composed of carbon fiber and silicon carbide at a high temperature of 1700 degrees. The weight of the ceramic disc is less than half of the ordinary cast iron disc. For example, the SLR MCIAREB with ceramic brakes has a front wheel brake disc with a diameter of 370mm but a weight of only 6.4 kg. The CL-CLASS, which uses ordinary بریک ڈسکس, has a front disc diameter of 360mm but weighs up to 15.4 kg. Although the ceramic brake disc has excellent braking performance, its price is very expensive. For example, the optional price on high-performance sports cars of Porsche and Audi is more than 100,000 yuan.
کے بارے میں بات کرتے ہیں
روکنے والے گدے again. Generally divided into asbestos type روکنے والے گدے, semi-metal type روکنے والے گدے, low metal type روکنے والے گدے, ceramic type
روکنے والے گدے, NAO (non-asbestos organic matter) type روکنے والے گدے. The so-called asbestos-type روکنے والے گدے are the earliest روکنے والے گدے used at low cost and easy to manufacture. Early and common use. However, asbestos materials have been confirmed by the medical community to be carcinogens and their use is now banned. From the appearance of semi-metal روکنے والے گدے, it has fine fibers and particles, which can be easily distinguished from asbestos type and NAO type. Compared with traditional brake materials, it mainly uses metal materials to increase the strength of the
روکنے والے گدے.At the same time, temperature control and heat dissipation capabilities are also superior to traditional materials. However, because the material of the brake pad contains more metal components, especially in a low temperature environment, excessive braking pressure will cause the surface between the brake disc and the brake drum to wear and produce noise. From the appearance of low-metal روکنے والے گدے, low-metal روکنے والے گدے are somewhat similar to semi-metal
روکنے والے گدے, with fine fibers and particles. The difference is that they have lower metal content than semi-metal روکنے والے گدے. Ceramic روکنے والے گدے The روکنے والے گدے of this formula use new ceramic materials with low density, high temperature resistance and wear resistance. It has the advantages of no noise, no dust, no corrosion to the hub, long service life, and environmental protection, but the price is higher. As for the NAO (non-asbestos organic matter) روکنے والے گدے, it should belong to the legendary artifact. It has the advantages of no dust pollution, low wear, low noise, and the service life is significantly extended.
